Dell Storage PS6610 Series Arrays
More capacity and performance
Increase capacity and improve performance with an ultra-dense array for midsized deployments.
SKU
Storage-PS6610
Specification
Operating System
- Operating systems and hypervisors:
Microsoft® Windows Server®
including Hyper-V®
VMware® ESX Server™
Red Hat® Enterprise Linux® (RHEL)
SUSE® Enterprise Linux® (SLES)
Oracle® Linux
Citrix® XenServer®
Expansion Capacity
- Can be combined with other PS Series arrays in the same SAN group, online. Up to 16 total arrays per group. Additionally, PS and SC Series offer common management and cross-platform replication capabilities between arrays, providing PS Series customers the flexibility to add SC Series arrays to their environment, if and when they choose
Networking
- TCP Network Support:
IPv4, IPv6 compliant. USGv6 certified.
Network Interfaces:
Management network:
One 100BASE-TX dedicated management per controller
Interface ports:
Two 10GBASE-T with RJ45 and two 10GbE SFP+ for fibre or twin-ax copper cabling
Physical
- Height:
5U / 22.23cm (8.8in)
Width:
48.26cm (19in)
Depth:
91.44cm (36in)
Weight:
130.7kg (287.5lb) (max config)
Data Protection, Disaster Recovery, Security
- CHAP authentication
Access control for iSCSI
Access control for management interfaces including Active Directory, LDAP, or RADIUS support Common Criteria Certification with FW 7.1.1
Controller
- Dual controllers with 32GB non-volatile memory per controller
Environmental Operating Conditions
- Temperature range:
10 to 35°C / 50 to 95°F
Storage temperature:
-40 to 65°C / -40 to 149°F
Altitude:
maximum altitude of 12,000m (39,370ft)
Inlet type:
0 to 3,048m (0 to 10,000ft)
NOTE: Up to 35°C / 95°F maximum temperature is reduced by 1°C/300m (1°F/547ft) above 950m (3,117ft)
Operating relative humidity:
10% to 80% (noncondensing) with 29°C (84.2°F) maximum dew point
Non-operating relative humidity:
5% to 95% (noncondensing) with 33°C (91°F) maximum dew point
Operational shock:
5g 10ms ½ sine operational – done for XYZ axis
Non-operational shock:
20g 10ms ½ sine, for X and Y axis
Non-operational shock:
30g 10ms ½ sine for Z axis only
Vibration:
Random 21grms @ 5-500Hz operational / Random 1.04grms 2-200Hz non-operational
Acoustics:
LwA 8.0Bels
Air Quality:
Airborne contaminant level of G2 or lower as defined by ISA-S71.04-1985
Power
- Dual 2800W, 200-240VAC, 50/60Hz (high AC line power source only)
Management
- Dell Storage Manager (DSM): Allows you to perform day-to-day tasks across SC and PS Series arrays from a single management interface
PS Series Group Manager
SAN Headquarters multi-group performance and event monitoring tool
Serial console
Ability to configure a separate management network
SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
Multi-administrator support
Maximum Usable Capacity
- Drive Capacities:
PS6610E:
2TB, 4TB, 6TB NL-SAS drives
PS6610X:
600GB, 900GB, 1.2TB SAS drives
PS6610ES:
400GB, 800GB SSD and 2TB, 4TB NL-SAS drives
System Capacities:
PS6610E:
Up to 504TB
PS6610X:
Up to 100.8TB
PS6610ES:
Up to 291.2TB
Storage
- Unified storage:
Adding an FS7600 or FS7610 NAS appliance to PS Series group enables both block and file storage from a single storage solution.
Hard Drive
- Hard Disk Drives:
PS6610E:
42 x 2TB, 4TB, or 6TB or 84 x 4TB or 6TB hot-pluggable 3.5” 7.2K RPM NL-SAS drives
PS6610X:
84 x 600GB, or 42 or 84 x 900GB or 1.2TB hot-pluggable 2.5” 10K RPM SAS drives
PS6610ES:
14 hot-pluggable 2.5” SSDs and
70 hot-pluggable 3.5” 7.2K RPM NL-SAS drives
Self Encrypting Drives (SED):
PS6610E:
4TB NL-SAS SEDs in the 84 drive configuration
PS6610X:
1.2TB SAS SEDs in the 84 drive configuration
PS6610ES:
N/A
Reliability
- Redundant hot-swappable controllers
Hot-swappable disks and power supplies
RAID
- PS6610E, PS6610X:
RAID 6, RAID 10
PS6610ES:
RAID 6 Accelerated
Notification Methods
- SAN Headquarters alerting including Dell SupportAssist, SNMP traps, email, syslog
Technical Highlights
- Snapshots:
512 per volume / up to 10,000 total per group
Volume connections per PS series group:
Up to 1024 per pool / 4,096 per group
Host Protocol:
Any standards-compliant iSCSI initiator
Recommended Support
- Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support are recommended to provide you the right support services for your PS Series solution. Contact your Dell representative today for more information.
Enclosure Monitoring System
- Automatic spare configuration and utilization
SMART
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drives
| Manufacturer | Dell |
|---|
