Dell Storage MD1400 and MD1420 Direct-Attached Storage
Versatile density and performance.
Meet your storage density and performance requirements with simple, cost-effective 12Gb JBOD expansion for the latest generation of PowerEdge servers.
SKU
MD1400-and-MD1420 Direct-Attached-Storage
Specification
Expansion Capacity
- PERC H830 HBA enables expansion to 8 enclosures, PCIe 3.0, 12Gbps SAS, dual-port, 4 ports per enclosure
Connectivity
- Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H830 (4 enclosures per port, single path)
Unified mode (recommended redundant path) for daisy chaining up to 4 enclosures per PERC H830 (4 enclosures connected to both ports via redundant path cabling)
Connectivity per EMM:
4 mini-SAS HD connector for connection to the host or expansion
Service management:
USB mini b connector (for factory use only)
Environmental Operating Conditions
- Temperature:
Operating: 10° to 35°C (50° to 95°F) with maximum temperature gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temperature gradation of 20°C per hour
Relative Humidity:
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)
Altitude:
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)
Power
- Wattage – also supports DC power:
AC – 600W; DC – 700W
Host heat dissipation:
AC – 2047 BTU/hr; DC – 2388 BTU/hr
Input voltage range:
100-240 VAC, auto-sensing; 48 V DC
Frequency range:
50/60 Hz
Amperage:
8.6 A at 100 V, 4.3 A at 240 V
Supported continuous consumption:
Up to 1.2 A at +5V
Up to 0.5 A at +12V
Management
- Enclosure Management Modules (EMM)
2 EMM provide redundant enclosure management capability
Storage
- Drive count per chassis
MD1400:
Up to 12 hot-pluggable 3.5" and 2.5" drives (2.5" available with adapter)
MD1420:
Up to 24 hot-pluggable 2.5" drives
Drive performance and capacities
MD1400:
3.5" NL-SAS 6Gb HDD (7.2K): 1TB, 2TB, 4TB
3.5" NL-SAS 512e 12Gb HDD (7.2K): 6TB, 8TB, 10TB
2.5” SAS 6Gb HDD (7.2K): 500GB
2.5” SAS 6Gb HDD (10K): 300GB, 600GB, 1.2TB, 1.8TB
2.5” NL-SAS 12Gb HDD (7.2K): 2TB
2.5” SAS 12Gb SED (15K): 600GB
2.5” SAS 6Gb HDD (15K): 300GB, 600GB
2.5” SAS 12Gb SSD: 200GB, 400GB, 800GB (WI); 200GB, 400GB, 800GB, 1.6TB (MU); 800GB, 1.6TB (RI)
MD1420:
2.5” NL-SAS 6Gb HDD (7.2K): 500GB, 1TB
2.5” NL-SAS 12Gb HDD (7.2K): 2TB
2.5” SAS 6Gb HDD (10K): 300GB, 600GB, 1.2TB, 1.8TB
2.5” SAS 6Gb SED (10K): 1.2TB
2.5” SAS 6Gb HDD (15K): 300GB, 600GB
2.5” SAS 12Gb SED (15K): 600GB
2.5” SAS 12Gb SSD: 200GB, 400GB, 800GB (WI); 200GB, 400GB, 800GB, 1.6TB (MU); 800GB, 1.6TB (RI)
Maximum Capacity (per enclosure)
MD1400:
Up to 120TB when using 12 x 10TB NL-SAS 3.5" HDDsMD1420:
Up to 48TB when using 24 x 2TB NL-SAS
2.5" HDDs
Dimensions
- Height x width x depth:
8.7 cm (3.39") x 48.2 cm (18.8") x 54.1 cm (29.1")
Weight:
MD1400:
28.59 kg (63.03 lb) (maximum configuration)
9.0 kg (19.8 lb ) (empty)
MD1420:
24.2 kg (53.35 lb) (maximum configuration)
8.8 kg (19.4 lb) (empty)
RAID
- RAID levels 0, 1, 5, 6, 10, 50 and 60
Rack Support
- Dell ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks
| Manufacturer | Dell |
|---|
